The Austhai 1100 Ferrycat is an established model that has built an enviable reputation since its introduction in 2006. The seaworthy hull, huge cockpit area, economy of operation and maintenance free construction have made it a favorite amongst discerning operators. With the ability to customize to meet an operator’s exact requirements this boat is definitely worthy of consideration. The Ferrycat is CE Type Approved for European use
austhai 1100 ferrycat, thailand boat builders, marine industry

QUICK SPECS

Approx. Weight (LLC)

4200 kg

Beam (ft/meters)

10'8" /3.31

Length-Centerline (ft/meters)

35'6" /10.88

Person Capacity

20

  • Technical Specs
  • Concept Designs
Parameter Symbol Units Value
       
Length      
       
maximum length LMAX m 10.88
length of hull LH m 10.08
length of waterline  LWL m 9.23
       
Beam      
       
maximum beam BMAX m 3.31
beam of hull BH m 3.26
beam at waterline* BWL m 1.03
beam between centres of buoyancy BCB m 1.97
       
Depth      
       
maximum depth DMAX m 2.15
midship depth DLWL/2 m 1.98
       
Freeboard      
       
freeboard forward FF m 1.68
freeboard midship FM m 1.523
freeboard aft FA m 0.77
       
Draught      
       
canoe body draught (lightship) TC m 0.47
minimum draught (lightship) TMIN m 0.47
maximum draught (loaded) TMAX m 0.75
       
Height      
       
headroom in saloon   m 2.00
air draught (at DWL) HA m 3.13
bridgedeck height (vertical clearance)   m 0.31
       
Displacement      
       
volume displacement VD m3 5.68
light craft mass (LCC) mLCC kg 4200
minimum operation condition mass (MOC) mMOC kg 4400
loaded craft mass (LDC) mLDC kg 7935
maximum load mMTL kg 3735
immersion (at DWL)   kg/cm 174
       
Engines      
       
number of engines     2
recommended power     250…350
       
Performance      
       
maximum speed, lightship   kts 42**
maximum speed, full load   kts 32**
recommended cruising speed   kts 26..30
       
Tankage      
       
fuel   L 2x450
water   L 1x200
       
Passengers/Crew      
       
crew/passengers   - 32
       
Coefficients and parameters      
       
block coefficient* CB - 0.44
midship section area coefficient* CM - 0.530
waterplane area coefficient* CWP - 0.614
prismatic coefficient* CP - 0.829
longitudinal center of buoyancy LCB/LWL - 0.428
length to displacement ratio* LWL/VD1/3 - 5.171
displacement to length ratio* DLR - 206.8
       
Certification      
       
EU RCD category     B 'offshore'
* - for one hull only   ** - estimated speed
 All measurements according to ISO8666
 DWL corresponds to full load displacement (LDC)
The Austhai 1100 Divecat is CE Certified
   
Copyright © 2016 AusThaiMarine | Privacy | Design by Entergraph Web Development